info@tecko.com.ua
WHERE CERTIFICATION IS REQUIRED
Conformity assessment or certification
Refusal letters
Module A according to technical regulations

Electromagnetic compatibility

The conformity assessment according to the requirements of the Technical Regulation of  Electromagnetic compatibility, approved by the Resolution of the Cabinet of Ministers of Ukraine No. 1077 dated January 30, 2013, is a mandatory requirement. Equipment shall satisfy the essential requirements set out in Annex I of the Technical regulation. National standards are used to confirm compliance, that provides a presumption of equipment compliance with the requirements of the Technical Regulation of electromagnetic compatibility.

It is necessary to submit an application to the Conformity Assessment Body "TECKO" for carrying out conformity assessment work with the requirements of the Technical Regulation. The technical file is attached in electronic form together with the application in accordance with the List defined by the relevant assessment procedures (modules).  It is necessary to send a completed application with a set of documents on e-mail: info@tecko.com.ua. Within 1-2 working days, we will definitely contact you to agree on the timing and cost of work.

The application for works
The list of required documents for the conformity assessment
Apply online
Registration of a declaration of conformity for module A

Information on the Technical Regulation of electromagnetic compatibility

The Technical Regulation of Ukraine Electromagnetic compatibility
The Resolution of CMU № 1077 dated 16.12.2015
Mandatory use beginning with 30.06.2016
Similar EU directive Directive 2014/30/EU (EMC)

The scope of the Technical Regulation of electromagnetic compatibility applies to any equipment or stationary installation, except equipment as defined in Article 3 of this Technical regulation.

The following conformity assessment proceduresare applied:

  • internal production control (module А);
  • type examination (module В) combined with conformity to type based on internal production control (module С).

Typically, three Technical regulations are applied together for electric machinery:

Affixing the mark of conformity to technical regulation is mandatory.

The list of national standards that meet European harmonized standards and voluntary application of which can be perceived as proof of compliance with the requirements of the Technical Regulation of electromagnetic compatibility (Order of Ministry of Economy №2569 from 08.12.2020).

Annexes 1 and 2 to the list of national standards (Order of Ministry of Economy №74 from 15.01.2021)

See the European Directive for information:   
2014/30/EU Electromagnetic compatibility (EMC) (dated 26.02.2014)